CLK 430 (208.370) V8-4.3L (113.943) (1999)
NOTE: Do not remove protective foil
9
Prepare window for installation
10
Prepare body flange for installation of window
11
Align side window in body opening
See "Special Tools" given below.
12
Remove protective foil from rubber spacers
13
Apply glue
-
Betagun 2K electric cartridge gun. See "Commercially Available Tools" given below.
NOTE: Height of glue bead approx. 13 mm
CAUTION: Install window within 10 minutes before adhesive force of glue starts to decrease
14
Insert side window
See "Commercially Available Tools" given below.
NOTE: Curing time is approx. 1 hour, calculated from the time the rear side window is installed.
15
Install molding on rear side window
16
Install side paneling in rear
17
Install paneling on C-pillar
18
Install paneling at B-pillar
19
Clean rear side window
Special Tools
Special Tools
Commercially Available Tools
Commercially Available Tools