CLK 430 Cabriolet (208.470) V8-4.3L (113.943) (2000)
Power Seat Control Module: Procedures
Replacing Power Seat Control Module With Memory
1
Remove front seat
NOTE: Disconnect electrical leads and pneumatic lines
2
Pull off connectors (5 to 10)
NOTE: Open cover (3) above connector strip
3
Unscrew Torx socket bolts (1)
4
Unclip clip (2) from seat subframe and remove left front ESA control module (with memory) (N32/1) or right front ESA control module (with
memory) (N32/2)
5
Reinstall in opposite order
6
Check for proper function