CLK 430 Cabriolet (208.470) V8-4.3L (113.943) (2000)
GF42.31-P-4500-01A BAS Control Unit, Function
GF42.31-P-4500-01A BAS control unit, function
In all vehicles with engines 112, 113, 605, 606, 611, 612, 613 and ESP
the BAS function is integrated in the ESP control unit (N47-5).
With models 163, 168, 203, 209, 215, 220
the BAS function is integrated in the ESP control unit (N47-5).
The BAS control unit (N48) is divided up functionally as follows:
^
Signal conditioning
^
Logic section
^
Safety circuit
Signal conditioning
The following input signals are conditioned for the logic section:
^
2 rpm sensors at front (via CAN from traction system control unit: ABS, ETS, ASR or ESP)
^
Stop lamp switch (via CAN from traction system control unit: ABS, ETS, ASR or ESP)
^
Vehicle identification (vehicle model and engine type via CAN from corresponding engine control unit)
^
BAS diaphragm travel sensor
^
BAS release switch