CLK 430 Cabriolet (208.470) V8-4.3L (113.943) (2000)
Accelerator Pedal Position Sensor: All Technical Service Bulletins
Campaign - Accelerator Pedal Value Sensor, Failure
FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER
Campaign No. 2000110005
December 2000
TO: ALL MERCEDES-BENZ CENTERS
SUBJECT:
MODEL 203.061/064
MODEL 208.365/370/374/465/470
MODEL 210.065
REPLACEMENT OF PEDAL VALUE SENSOR (B37)
This campaign has been initiated because it has been determined that under certain operating conditions the pedal value sensor (B37, Figure 1) may fail,
causing the engine to run in "Limp Home" mode or the CHECK ENGINE MIL (A1 e26) to illuminate in the instrument cluster. This requires the
replacement of the pedal value sensor (B37).
Prior to performing this Service Campaign, please check VMI to insure the vehicle is involved and to determine if the vehicle has been previously
repaired.
Note:
Regarding PROCEDURE below:
Note:
The pedal value sensor (B37) is located as follows based on model application:
Model 203: Accelerator pedal (see Figure 1).