CLK 430 Cabriolet (208.470) V8-4.3L (113.943) (2000)
Radius Arm: Service and Repair
Remove/install Radius Rod
Model 210 Illustrated
CAUTION: Installation: Replace self-locking nuts
DANGER:
-
Risk of fatal accident from vehicle slipping or toppling off the lift platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
3
Torque strut
NOTE: Models 129, 170, 202, 208, removal: Push wheel carrier forwards and release before pulling out hexagon bolt at rear axle carrier.
CAUTION: The rear axle shaft must be horizontal when tightening the nuts
3h
Sleeve in wheel carrier to reduce diameter
-
Install sleeve for tension arm in wheel carrier.
112c Brake caliper dust shield without dent
-
Only model 202.018/020/022/023/121: To removing bolt of tension arms from wheel carrier brake caliper, push dust shield approx. 3 mm
towards brake disk.