CLK 500 (209.375) V8-5.0L (113.968) (2003)
1. Fasten the heat shield (1) with bracket (2) and nut M6 (3) onto the starter solenoid switch.
The wiring harness (4) must not contact the stud of bracket (2).
AN31.11-P-8080-08Q Add Bumper Cutout As Aftermarket Solution
AN31.11-P-8080-08Q Add Bumper Cutout As Aftermarket Solution
- 209.3##/3##/4##/4## (except 209.376/377/476/477) 1#
- except CODE (772) AMG styling package - front spoiler, side skirts and rear apron
- except CODE (950) AMG sport package
1. Make cutout for trailer hitch (arrow) in rear bumper (e.g. with a pneumatic saw).
The recess is marked on the inside of the bumper.
AN31.19-P-8100-05Q Retrofitting Trailer Hitch Wiring Harness
AN31.19-P-8100-05Q Retrofitting Trailer Hitch Wiring Harness
- 209.3##/3## (except 209.376/377) 1#
- except CODE (772) AMG styling package - front spoiler, side skirts and rear apron
- except CODE (950) AMG sport package