CLK 500 (209.375) V8-5.0L (113.968) (2003)
The area on the trunk lid to be glued must be free of dust and grease. To clean use a 50 : 50 mixture of IPA (iso-propanol alcohol) and water.
Installation
4. Center rear spoiler (1) on center high-mounted stop lamp (E21) and position area with foil removed on marking (2) (TESA masking tape).
Ensure that rear spoiler is seated correctly on marks Check measurement if required.
5. Carefully pull protective foil (4) off of front edge of rear spoiler starting at center and firmly press on rear spoiler (1) from center toward outside.
Remove air bubbles from adhesive foil by firmly pressing from inside toward outside Ensure that rear spoiler is seated correctly on marks.Check
measurement if required.
2 Markings