CLK 500 (209.375) V8-5.0L (113.968) (2003)
Engine Mount: Service and Repair
AR22.10-P-4340PV Remove/Install Right Engine Support
Remove/install Right Engine Support
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Remove engine mounts
2
Dismount right engine support (2) from crankcase
NOTE: For this step, unscrew bolts (1)
CAUTION: Installation: Bolts (1) must be replaced, because the connection can loosen or the screws can tear off if reused.
3
Remove right engine support (2)
NOTE: Installation: Ensure that the electrical lines are not pinched.
4
Install in the reverse order