CLK 500 (209.375) V8-5.0L (113.968) (2003)
10
Separate front exhaust system/catalytic converter (1) from the rear exhaust system.
NOTE: Installation: check seal ring (7) for damage, replace if necessary. Use emery cloth to remove combustion and corrosion residues at
connection points.
CAUTION: Replace bolts (8) and nuts (9), because if they are used again the connection may not be tight and the bolts can shear off.
11
Remove front exhaust system/catalytic converter (1)
NOTE:
-
Push rear exhaust system to the rear for this step.
-
Installation: install front exhaust system/three-way catalytic converter (1) free of tension.
12
Detach right catalytic converter (1a)
NOTE: Installation: Use emery cloth to remove combustion and corrosion residues at connection points. Install right three way catalytic
converter (la) free of tension.
CAUTION: Replace bolts (10) and nuts (11), because if they are used again the connection may not be tight and the bolts can shear off.
13
Install in the reverse order.