CLK 550 (209.372) V8-5.5L (273.967) (2008)
/v8-5.5l_(273.967)/Page-3559003.png)
6. Carefully pull protective foil (4) out at bottom edge of rear spoiler (1) starting at center and firmly press rear spoiler (1).
After positioning, the rear spoiler must be pressed down firmly along the entire bonding surface.
7. To increase process safety during installation of rear spoiler (1), press spoiler onto trunk lid (3) with a 3M load roller (5) starting at one side.
When pressing on ensure that the pressure is applied directly on the adhesive tape
The maximum adhesive force is reached after approx. 72 hours at 20 °C. Do not use carwash within 24 hours and do not perform rain test Prevent
any mechanical stress.
