mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Engine - Multiple DTC's Set/MIL ON|Page 5057 > < Engine - MIL ON/Multiple Camshaft Codes Set|Page 5051
Page 1
background image

Technical Service Bulletin # S-03_30-08J

Date: 090617

Engine - Multiple DTC's Set/MIL ON

Date: June 17, 2009

Order No.: S-B-03.30/08j

Supersedes: S-B-03.30/08i dated April 29, 2009

Group: 03

Revision History

SUBJECT:

Check Engine Light On / Fault Codes Current and/or Stored in ME-SFI Control Module / Oil Leaking at Camshaft Adjustment Solenoid

If you receive customer reports of the check engine light being illuminated and one of the following Fault Code Scenarios (no corresponding Fault Codes
in Scenario 3) is found in the above model vehicles, follow the applicable procedure below to resolve. 

Note:

Corresponding protocols (i.e. ME Control Module log file related to DTC code) must always be included with any returned parts as indicated on the
Warranty Return Form Printout Matrix (RFPM). If the documentation is missing or does not support the diagnosis, the warranty claim may be debited.

Note:

Flashing the ME Control Module will not resolve these issues and is unnecessary at this point.

Note:

Mobil Training Coach (MTC) "M272 Engine Timing" can be referred to when performing repairs. However, this DTB takes precedence in terms of
technical and warranty content as well as referred WIS documents. Any parts specified in the DTB or in referenced WIS documents should be replaced

Engine - Multiple DTC's Set/MIL ON|Page 5057 > < Engine - MIL ON/Multiple Camshaft Codes Set|Page 5051