mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Electrical Diagrams|Page 3147 > < Electrical Diagrams|Page 3145
Page 1
background image

Vehicle: Technician Safety Information

AH00.00-U-1000-01Z Observe Safety Regulations When the Engine Is Running

AH00.00-U-1000-01Z Observe Safety Regulations When The Engine Is Running

Before performing jobs with engine running apply parking brake.
On vehicles with automatic transmission place selector lever into position  P".
On vehicles with manual transmission place shift lever into neutral.

AS54.00-Z-0001-01A Risk Of Death When Touching Components On Vehicles With High-voltage
On-board Electrical System

AS54.00-Z-0001-01A Risk Of Death When Touching Components On Vehicles With High-voltage On-board Electrical System

DANGER:  Do not touch components and open lines of the high-voltage on-board electrical system. Persons who are carriers of electronic
implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems.

High-voltage on-board electrical system

Voltage values of > 120 volt apply in the entire high-voltage on- board electrical system.

Risk of death caused by electric shock

Burns, fibrillation of the heart or cardiac arrest due to electric shock can occur when touching components of the high-voltage on-board electrical system.
The consequences of an electric shock may also only occur after a few minutes, therefore a doctor should be consulted in every case.

Safety instructions/precautions

-

Persons who are carriers of electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage onboard electrical systems.

-

Open lines and components of the high-voltage on-board electrical system must not be touched under any circumstances.
In particular this affects accident vehicles before the high- voltage on-board electrical system is put out of action.

-

Work on components of the high-voltage on-board electrical system may only be carried out by persons proven to have taken part in special
qualification measures and who have completed special electrotechnical training and are authorized.

AS54.10-Z-0001-01A Risk Of Explosion From Gas. Risk Of Poisoning And Burns From Swallowing
Battery Electrolyte.

AS54.10-Z-0001-01A Risk Of Explosion From Gas. Risk Of Poisoning And Burns From Swallowing Battery Electrolyte. Risk Of Injury To
Eyes And Skin As Result Of Caustic Burns From Battery Electrolyte Or From Handling Damaged Lead- Acid Batteries.

DANGER:  No fire, sparks, naked flames or smoking. Wear acid-resistant gloves, clothing and eye protection. Pour battery electrolyte only into
suitable and appropriately marked containers.

Possible hazards

Risk of explosion

A highly explosive gas mixture is produced when charging lead-acid batteries.

Risk of poisoning

If battery electrolyte is swallowed, this can result in manifestations of poisoning such as headaches, dizziness, stomach pain, respiratory paralysis,
unconsciousness, vomiting and cramps.
Battery electrolyte mist causes caustic burns to the eyes. If swallowed, this can result in caustic burns to the mucous membranes and respiratory passages.
The absorption of lead in the body can cause damage to blood, nerves and kidneys; in addition, lead compounds are considered to represent a
reproductive hazard.

Injury hazard
Battery electrolyte contains sulfuric acid which can cause severe caustic burns to skin and eyes. Strict caution is required when leadhandling damaged
lead-acid batteries (removing from vehicle damaged in accident) because of the sharp edges on the fractured housing and direct contact with the lead
plates.

Protective measures/rules of conduct

-

Charge lead-acid batteries only in well ventilated areas.

-

No fire, sparks, naked flames or smoking.

Electrical Diagrams|Page 3147 > < Electrical Diagrams|Page 3145