CLK 550 (209.372) V8-5.5L (273.967) (2008)
2
Remove hot film mass air flow sensor together with air intake pipe
3
Remove crank case purge line (1/2)
4
Disconnect electrical connector (arrow)
NOTE: Pull catch backwards.
5
Remove electronic accelerator pedal actuator (M16/1)
NOTE: Undo screws (8/1).
CAUTION: Installation: Replace O-ring (8/2).
Refer to Electronic Accelerator Pedal Actuator below
6
Install in the reverse order
Electronic Accelerator Pedal Actuator