CLK 550 (209.372) V8-5.5L (273.967) (2008)
/v8-5.5l_(273.967)/Page-1533003.png)
7.2 Check for correct seating of the seal (4), attach clamping ring (3b) and tighten screw clamp using a torque wrench and flexible extension [Nm].
Aid of helper required. The recess points on the clamping ring (3b) and fuel tank must coincide.
8
Mount fuel line (2).
Installation: Replace the CLIC clamps (A). One should not use any screw clamps or spring bracket clamps otherwise leakage and personal injury
or damage to equipment and the environment can occur.
9
Mount all electrical connectors.
