mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Emergency Contact/Alarm System - System 'Runaway'|Page 12
Page 3
background image

The table describes the type of signals used to communicate the RDU and AAN signals to the TeleAid control unit:

^

If the vehicle supports a discrete signal for AAN, a 12V signal to pin 32 on the TeleAid control unit will trigger a call for an alarm notification.

^

If the vehicle supports a discrete signal for RDU, a 0V signal to pin 41 on the TeleAid control unit will trigger a call for a remote door unlock
request.

Some models support CAN messages to the TeleAid control unit for both RDU and AAN.

In Case of Warranty

All Technical Service Bulletins: > < Emergency Contact/Alarm System - System 'Runaway'|Page 12