CLK 55 AMG Cabriolet (209.476) V8-5.5L (113.987) (2006)
Parking Assist Distance Sensor: Service and Repair
AZ54.65-P-0001-03Q Install Sensors and Connect
AZ54.65-P-0001-03Q Install Sensors And Connect
1. Attach adhesive tape to bottom edge of bumper molding strip.
2. Mark center of bumper on adhesive tape.
3. Transfer marks to adhesive tape as shown in figure.
4. Position template on markings from left to right at center according to dimensions specified and transfer 29 mm dia. hole center points to molding
strip.
5. Drill molding strip with 5 mm dia. bit.
Drill parallel to vehicle so that the ultrasonic sensor to be installed later is positioned parallel to the road.
6. Check whether holes are drilled in the center of the recesses on the inside of the bumper.