CLK 55 AMG Cabriolet (209.476) V8-5.5L (113.987) (2006)
3. Remove inner and outer B-pillar, side portal frame and welding device.
4. Remove cross member reinforcement below rear seat and debur rivet holes on both sides.
5. Install cross member reinforcement below rear seat, fasten with clamping pliers and pop-up rivets with locking thread.
6. Cross member reinforcement below rear seat Continuous weld (areas A Band B).
7. Rivet cross member reinforcement below rear seat with 6.4 x 14 mm dia. Polygrip flat head rivets (areas C and D).