CLK 63 AMG (209.377) V8-6.3L (156.982) (2008)
/v8-6.3l_(156.982)/Page-3091009.png)
Component Identification
1. Lay new headliner (1) down on suitable subsurface.
2. Place suitable clean spacers, e.g. foamed material or styrofoam pads below new headliner.
Do not use any hard or sharp-edged objects, otherwise covering of new headliner (1) will be damaged.
The foamed material or styrofoam pads prevent the new headliner (1) from sagging when performing the following steps.
3. Route new telephone wiring harness (3) on new headliner (1) starting at overhead control panel control module opening.
The old headliner (1) serves as template for routing the wiring harness.
4. Glue new telephone system wiring harness (3) onto new headliner with an approx. 10 cm long strip of adhesive tape at a distance of approx. 10
cm.
Do not overcross new telephone wiring harness (3) and sound system wiring harness (2) (with code (810) Sound system) and sufficiently press on
strips of adhesive tape, otherwise a short circuit on the headliner can result from chafing.
AR68.30-P-4300-11Q Prepare Headliner For Installing Impact Absorber
AR68.30-P-4300-11Q Prepare Headliner For Installing Impact Absorber
- with CODE (494a) USA version
Repair Materials
