CLS 550 (219.372) V8-5.5L (273.960) (2007)
/v8-5.5l_(273.960)/Page-2680002.png)
Component Identification
2
Press rubber mount (62) with sleeve (15) and thrust piece (16) to the front to remove them from the rear axle carrier (8).
Install
Component Identification
3
Apply lubricant to the entire periphery of the rubber bushing (62) and clean the mounting socket in the rear subframe (8).
4
Position rubber mount (62) in rear subframe (8) from the front and press into rear subframe (8) using thrust piece (16) and sleeve, continuing until
you obtain the penetration depth recorded earlier.
