mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.95-P-0001TX TELE AID Operation|Page 14188 > < GF82.95-P-0001TX TELE AID Operation|Page 14186
Page 9
background image

GF82.95-P-2016TXU Emergency Call Function

GF82.95-P-2016TXU Emergency Call Function

- with CODE (359) TELE AID emergency call system

Activation

In the event that a driver gets into an emergency situation in a remote location, a service employee can get an overview of the situation inside the vehicle
using the data received from the emergency call system control unit (N123/4) and initiate corresponding remedial measures. A Telematic Alarm
Identification on Demand (emergency call system) (TELE AID) emergency call can be initiated automatically or manually.

Manual emergency call

It is possible to make a manual emergency call at any time. A manual emergency call is made by pressing the SOS switch (S93/3s1) labeled "SOS". It is
integrated into the overhead control panel control unit (N70). The SOS switch is read in via a discrete line by the emergency call system control unit. To
trigger manually, the SOS switch must be pressed for longer than 0.5 s.

The red LED flashes on and off for the duration of the emergency call. Then, an emergency call message is immediately transmitted to the nearest
emergency call center.

automatic alarm call

An automatic emergency call is possible after "circuit 15R ON". The accident is automatically detected by the restraint systems control unit (N2/7). The
emergency call system control unit receives the crash information from the restraint systems control unit via a direct digital crash signal, and additionally
(redundantly) via the Controller Area Network bus class B (interior) (CAN-B). In the event of an accident, an automatic emergency call is made
immediately. This occurs no matter how severe the detected accident actually is. With crash deployments, the red LED flashes on and off for the duration
of the emergency call.

The user is now able to connect by telephone to the emergency call center. The call is ended by the emergency call center. The emergency call system
control unit deactivates the emergency call request both for a manual and an automatic emergency call after 5 unsuccessful attempts.

GF82.95-P-0001TX TELE AID Operation|Page 14188 > < GF82.95-P-0001TX TELE AID Operation|Page 14186