CLS 55 AMG (219.376) V8-5.5L SC (113.990) (2006)
Instrument Cluster / Carrier: Description and Operation
GF54.30-P-0002-05TX Instrument Cluster (IC), Operating Information
GF54.30-P-0002-05TX Instrument Cluster (IC), Operating Information
Component Identification
The displays in the multifunction display (A1p13) of the instrument cluster (A1) and the settings in the control system can be controlled using the buttons
on the multifunction steering wheel. The standard display always appears when the instrument cluster is activated. The system selection button is used to
display the individual menus, the scroll forward/back button is used to display the submenus.
The plus and minus button is used to select submenus. The scroll forward/back button is used to select a function within a submenu. The plus and minus
button is used to make the actual settings.
The display only shows systems and functions available in the particular vehicle. If a system is not present, it is "skipped" when the system selection
button is pressed.
Confirm malfunction and warning messages
These messages are divided into 3 categories according to their priority. Messages of categories 2 and 3 in the multifunction display can be
acknowledged by pressing the instrument illumination rheostat and reset button (A1r1) or the system selection button. Messages of category 1 (highest
priority) cannot be acknowledged. Indicator or warning lamps that light up at the same time cannot be acknowledged.
Certain fault and warning messages are also accompanied by a chime. A signal always sounds when faults and warning messages are displayed.
The fault and warning messages are not stored in the fault memory.
Workshop level
The standard display switches to the workshop level if the instrument illumination rheostat and reset button is pressed 3 times in succession within 2 s.
The scroll forward/back button is used to switch between the following submenus:
^
On-board electrical system voltage display
^
Instrument cluster data
^
Dynamometer test mode
^
Chassis number
^
Service menu
Control system
The following table shows the structure of the possible menus and their submenus in the control system for the driver.