E 300 (124.131) L6-3.0L DSL (606.910) (1995)
/l6-3.0l_dsl_(606.910)/Page-476002.png)
-
To enable front axle carrier (1) to be lowered
6. Disconnect electric cable at front left of intake manifold
7. Unbolt electric cable (X4) at outside front left of frame floor
8. Remove front springs (17), refer to Steering and Suspension.
9. Unbolt front engine mounts (23) at front axle carrier
10. Detach exhaust at exhaust manifold, refer to Exhaust System.
11. Fit on engine supporting bar (01) and raise engine as follows:
Insert suitable bolts into the shock absorber mount from the bottom left and right and lock with nuts.
Fit on engine supporting bar (065), raise engine.
NOTE: Supports 210 589 00 61 000, or equivalent must be installed
12. Support front axle carrier using a suitable lifting device and adapter 210 589 01 62 00, or equivalent
