E 300 (124.131) L6-3.0L DSL (606.910) (1995)
Blower Motor: Service and Repair
Remove/Install Blower Motor
Removal and Installation of Blower Motor:
A. "Behr" Air Conditioner Unit:
-
Remove windshield wiper system. See Wiper Motor Service and Repair.
-
Pull out outside air temperature sensor (B10/5).
-
Remove cover (1); for this purpose unclip 8 clamps (arrows).
-
Unclip mounting strap (2).
-
Pull off flat plug on blower motor and remove blower motor (M2).
-
Reinstall in opposite order. Assure that the blower motor catches properly in the mount.
B. "Siemens/Thermal" Air Conditioner Unit: