E 300 (124.131) L6-3.0L DSL (606.910) (1995)
/l6-3.0l_dsl_(606.910)/Page-799005.png)
Measuring
9.
Determine play "A" with a feeler gauge.
Set play "A" with the snap ring (11) which is available in 3 thicknesses (2.0/2.5/3.0 mm). Which means, the groove for the snap ring is cut 3.2
mm wide. Only if the specified play "A" with the snap ring is not achieved, it is then necessary to additionally compensate this with the middle
externally.toothed discs. Set play to 0.7 - 1.3 mm.
