E 300D (210.020) L6-3.0L DSL (606.912) (1996)
Drive Belt: Service and Repair
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
REMOVAL
1. Remove viscous fan coupling, refer to Cooling System.
2. Slacken poly V-belt
-
Using a suitable shop made lever for pushing spring tensioning lever of poly V-belt tensioning device
3. Take off poly V-belt
4. Check poly V-belt, typical damage
-
Examine belt pulley surface and tensioning device for signs of damage and soiling; replace if necessary
INSTALLATION
1. Fit on poly V-belt
NOTE: Do not use belt wax or similar products
2. Fit on a 2140 mm poly V-belt in numerical order shown in the illustration above, beginning at tensioning pulley
3. Tension poly V-belt as follows: