E 320 4MATIC Sedan (210.082) V6-3.2L (112.941) (1999)
Crankshaft bearing cap
Crankshaft bearing cap
Component Identification
1
Blow out oil galleries with compressed air in direction of oil flow.
2
Clean bearing points in crankcase, main bearing cap and main bearing journal of crankshaft with a chamois leather.
If a bearing damage has occurred, it may be necessary to remove any swarf from the connecting rod bores, oil ducts, the crankshaft and crankcase ca
The top bearing shell halves (1) are assigned to the basic journal of the crankshaft by means of a colored ring on the rear of the upper bearing shell half
Only the assigned color and number combinations (per the table) should be fitted together.
Assignment of crankshaft bearing shell top halves (crankcase) M 112, 113