E 320 4MATIC Sedan (210.082) V6-3.2L (112.941) (1999)
Tail Lamp: Service and Repair
AR82.10-P-4915A Remove/Install Taillamp In Trunk Lid
Removing And Installing Taillamp In Trunk Lid
1
Screw off cap nuts (5)
2
Remove clamp retainer (2)
NOTE:
-
Unscrew screw (3) on clamp retainer (2) only far enough to release clamp retainer and thereby release taillamp (1) from trunk lid.
-
Installation: First attach clamp retainer (2) to sheet metal crimp on installation opening and tension lightly. Then uniformly tighten cap
nuts (5) and screw (3) for clamp retainer (2).
3
Remove taillamp (1) from trunk lid together with gasket (6)
NOTE: Installation: ensure that gasket is in good condition and properly seated
4
Disconnect electrical connector (4) from taillamp
5
Reinstall in opposite order