E 320 4MATIC Sedan (210.082) V6-3.2L (112.941) (1999)
/v6-3.2l_(112.941)/Page-551019.png)
4. Adjust toe-in by loosening the lock nut (10f) and rotating the track rods (10)
-
After adjusting toe-in check boot for twisting
-
Tighten lock nut (10f) to: 60 Nm
SPECIFICATIONS
Toe-In of front wheels: 0°10' ± 10'
Checking and Adjusting Rear Wheel Toe-In
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
INSPECTION
1. Follow sequence of steps for performing alignment
2. Check vehicle level at front axle and rear axle, refer to "Checking Vehicle Level at Front and Rear" at "Automatic Suspension".
ADJUSTMENT
1. Adjust toe-in with cam bolt (60a) at mount of the left and right track rod (60) at rear axle carrier (50)
2. Tighten nut of cam bolt for rear axle track rod to: 70 Nm
NOTE: On models with xenon headlamps, check headlamp adjustment after changing the toe-in
SPECIFICATIONS
Total Toe-In Of Rear Wheels: 0°.33' ± 7'
