E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
3
Deactivate SBC brake system using STAR DIAGNOSIS.
CAUTION: See notes on repairs to brake system
4
Release parking brake
-
Only if removing brake disks (61) on the rear axle.
5
Raise vehicle with lifting platform so that the wheels clear the ground
6
Remove brake caliper
CAUTION:
-
Do not disconnect brake hose.
-
Do not stretch brake hose, hang up brake caliper using a hook.
NOTE:
-
Installation: Install new retaining bolts for fixed caliper or floating caliper.
7
Unscrew locking bolt (63) and remove brake disk (61)
CAUTION: If the parking brake drums are run in turn back parking brake adjuster. Otherwise the parking brake shoes will be
damaged, refer to, adjusting parking brake
NOTE: Installation: Always replace brake disks (61) in pairs. Lightly grease seat of brake disk (61) with MB long-term grease. Replace locking
bolt (63).
Inspect
8
Check lining thickness and condition of parking brake shoes
-
After removing the rear axle brake disks (61), if necessary, install new parking brake shoes.
9
Install in the reverse order
Inspect
10
Check version of pedal assembly
-
Only if removing brake disks (61) on the rear axle.
11
Adjusting parking brake
-
Only if removing brake disks (61) on the rear axle.
12
Activate SBC brake system using STAR DIAGNOSIS.
13
Use STAR DIAGNOSIS to move brake pads toward brake disks
14
Inspect fluid level in expansion reservoir, adjust to correct level if necessary.
AR42.10-P-2260-01I Cleaning Perforations In Brake Discs
AR42.10-P-2260-01I Cleaning perforations in brake discs