E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Cruise Control Switch: Service and Repair
AR54.25-P-2803T Remove/Install Cruise Control Switch
AR54.25-P-2803T Remove/Install Cruise Control Switch
DANGER:
-
Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury; through
burns to skin and eyes from battery acid or when handling damaged lead-acid batteries
-
No fire, sparks, naked flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte
only into suitable and appropriately marked containers.
1
Disconnect ground cable of battery
NOTE: Do not connect quiescent current retention unit.
DANGER:
-
Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.
-
Store airbag unit with expulsion area on top, do not subject to temperatures above 100 degree C. When working on these units,
disconnect the power supply.
2
Remove steering wheel
CAUTION: Instructions for performing repair, body work and welding on vehicles with airbags and emergency tensioning retractors
3
Remove clock spring contact
4
Take cruise control pushbutton switch (S40) out of steering column switch module (1)
5
Install in the reverse order
6
Perform basic programming
7
Read out DTC memory
8
Check for proper function