E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Evaporator Core: Removal and Replacement
AR83.30-P-5540T Remove/Install Evaporator
1
Remove heat exchanger
2
Unscrew screw (3)
3
Detach clamps (2) and remove evaporator housing cover (4)
4
Undo screws from expansion valve (5) and remove expansion valve
NOTE: Installation: Install new sealing rings and moisten thread with compressor oil.
-
Bolt on expansion valve: 8 N.m
5
Remove retaining plate (7) and seal boot (6).
NOTE: Installation: Note installation position of retaining plate (7) and seal boot (6).
6
Remove the evaporator (1).
NOTE: Installation: If evaporator (1) has been replaced, add additional compressor oil quantity when filling air conditioning system.
-
Additional oil filling capacity when replacing evaporator: 40 cu.cm
For Refrigerant compressor 7SEU16C.
7
Install in the reverse order.