E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Headlamp Alignment Control Module: Service and Repair
AR82.10-P-4081T Remove/Install Headlight Beam Adjustment Control Module
AR82.10-P-4081T Remove/Install Headlight Beam Adjustment Control Module
- With CODE (614) Bi-Xenon headlamp unit
- With CODE (615) Bi-Xenon headlamp unit with integrated cornering lamps
Shown On Model 211.0
Shown On Model 211.0
1
Remove right-hand front seat
2
Detach front edge guard (2) in area around front scuff plate (1).
3
Remove scuff plate (1)
4
Detach rear edge guard (4) in area around rear scuff plate (3)
5
Remove rear scuff plate (3)
6
Unclip rear footwell air grate (6) (arrow) and remove
7
Pull out rear floor lining (7) from under the B-pillar paneling (8)