E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Body Control Module: Service and Repair
AR54.21-P-1258T Remove/Install Sam With Fuse and Relay Box, Rear
AR54.21-P-1258T Remove/Install Sam With Fuse and Relay Box, Rear
1
Connect STAR DIAGNOSIS and stage basic data from rear SAM control module with fuse and relay module (N10/2) in STAR DIAGNOSIS
NOTE:
-
Only when installing new rear SAM control module with fuse and relay module (N10/2)
-
Installation: Transfer staged basic data to new rear SAM control module with fuse and relay module (N10/2)
-
Diagnosis system STAR DIAGNOSIS
2
Disconnect ground cable of battery
3
Remove left side trunk lining in trunk
4
Unscrew bolt (1), remove control module mount (2) and place to one side
5
Unscrew screw (3)
6
Remove wiring harness (4) from bracket (5)
NOTE: Installation: Replace tie straps
7
Unplug electrical connectors from rear SAM control module with fuse and relay module (N10/2)
NOTE: Number of electrical connectors depends on vehicle equipment
CAUTION: Installation: Ensure that none of the electrical lines are pinched, pay attention to color coding of electrical connectors
Otherwise electrical system could be damaged.
8
Remove rear SAM control module with fuse and relay module (N10/2)
9
Install in the reverse order