E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Pay attention to the chamfer (arrow) on the sleeve (068f) It must fit exactly against the rear axle carrier.
Component Identification
11
Press the rubber mount (6b) into the rear axle carrier until the thrust piece (068g) abuts the rear axle carrier (arrow).
Model 215, 220
12.1
Mount exhaust bracket on rear axle carrier.
AR33.15-P-0160-03T Remove/Install Rubber Boots on Rubber Mount
AR33.15-P-0160-03T Remove/install rubber boots on rubber mount
Component Identification
Only assemble rubber boots on hydro mounts (B). Assembly is not envisaged on conventional rubber mounts (A).