E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Stabilizer Link: Service and Repair
AR32.20-P-0300-02VM Detach/install link rod at torsion bar
Front Axle Stabilizer Bar
Removal
Component Identification
1
Unscrew self-locking nut (01) and bolt (02) of link rod (10) at stabilizer bar (11).
Checking
2
Check rubber mount of link rod (10) for damage and replace link rod (10) if necessary.
Install
3
Screw on self-locking nut (01) and bolt (02) of link rod (10) on stabilizer bar (11).
Replace self-locking nut (01). Only tighten self-locking nut (01) when vehicle is ready to drive, turn steering if necessary.