E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
1
Remove and install circlip using pliers.
Installation: Ensure that the circlip is properly seated in the groove.
AR33.20-P-0315-03I Pulling Double-Row Angular Ball Bearing Out and In
AR33.20-P-0315-03I Pulling double-row angular ball bearing out and in
Special Tools
Extraction
Component Identification
1
Pull double-row angular ball bearing (9n) out of steering knuckle (5) using extraction and insertion tool and remove.
On model 169, 203, 245 use extraction and insertion tool 124 589 05 43 00.
On model 211, 220 use extraction and insertion tool 140 589 08 43 00.
Inserting
Component Identification
The double-row angular ball bearing (9n) must point with the seal (arrow) inwards.