E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Central Control Module: Service and Repair
Multifunction control module (N10-1) and transmission control module (TCM), 5-speed automatic N15/1 or transmission control module (ETC,
N15/3)
1
Pull slide catch for connector for windshield wiper and blower motor control module box (2) up and disconnect connector from multifunction
control module (N10-1).
2
Open connector (2) and separate coding section for connecting blower motor and control module box from connector.
3
Pivot locking tab (1) up and pivot connector for multifunction control module (N10-1) to side and remove control module from control module
box guides.
NOTE: The connector for the multifunction control module (N10-1) is mounted on the bottom of the control module box so that it can pivot
Pivot connector to side so that control module can be pulled out upward without resistance.
4
Disconnect connectors from 5-speed automatic transmission control module (ETC, N15/1) or transmission control module (ETC, N15/3) and
remove control module.