E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Technical Service Bulletin # 82_100
Date: 970801
CD Changer - Installation Procedure
REF. NO. MBNA 82/100
TO: ALL MERCEDES-BENZ PASSENGER CAR DEALERS
DATE: August 1997
SUBJECT:
MODELS 129 AND 210.265/.282
MODEL YEAR 1998
INSTALLATION OF CD CHANGER
Included in this Service Information Work Instructions no. 370 and 371 describe the installation of the CD changer in model year 1998 model 129 and
210 (Station Wagon) vehicles.
Registration:
Installation of all MB CD changers must be reported to MBNA. Installation prior to or at time of retail MUST be recorded through VISTA when the
vehicle sale is reported. However, once the vehicle has been reported sold, all subsequent installations must be registered by sending a CD CHANGER
INSTALLATION / WARRANTY REGISTRATION form to Mercedes-Benz of North America, Inc., Warranty Operations. Please photocopy form
shown in section 3 of the Warranty Policy and Procedures Manual.
If the installation of a MB CD changer is not registered with MBNA Warranty Operations, future claims for the unit will be denied.
Note:
The transfer of units from one vehicle to another, voids the warranty.
Model 129
Group: 82
Number: 370
Date: August 1997
SUBJECT:
MODEL 129
M.Y. 1998
INSTALLATION OF CD CHANGER
1.
Remove the left trunk liner panel, route the CD changer prewire harness into the wheel well area, then reinstall the panel.