E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
NOTE:
^
Install the transparent (temperature-resistant) version of the brake pad wear sensor (S10/4).
^
The wear sensor on the rear fixed caliper is not used anymore on model 202.028 with ASR as of 09/95.
-
Tighten brake pipe (5) on brake hose (51) to:
Except model 210 14 Nm
Model 210: 18 Nm
-
Tighten brake hose (51) on fixed caliper (31) to: 18 Nm
-
Refer to Replacement, for notes on installing brake hoses. See: Hydraulic System/Brake Hose/Line/Service and Repair
NOTE:
^
Brake hose connection on brake pipe modified.
^
The versions must not be mixed up
-
Refer to notes on installing brake pad wear indicator contact sensors. See: Brake Pad/Brake Pad Wear Sensor/Service and Repair
6. Bleed brake system. See: Brake Bleeding/Service and Repair
7. Check brake system for leaks, refer to Using Pedal Pressure. See: Hydraulic System/Testing and Inspection