E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
6
Take cylinder head (1) off assembly board (2)
DANGER:
-
Risk of explosion and poisoning from melting down and improper handling of sodium-filled valves. Risk of injury from burns and
caustic burns to skin sections in the event of contact with sodium.
-
Do not open sodium-filled valves; if necessary, wear protective gloves and eye protection if valves are damaged.
7
Remove valve (14)
NOTE: Installation: Check surface of valve stems for roughness and ridging (visual inspection or with a nail). Replace valves with rough stem
surface or burrs.
-
Grind in new or re-used valves with valve grinding-in paste before installing.
8
Inspect valves
CAUTION: The intake and exhaust valves must not be machined.
-
If the given tolerances fall short, the valve must be replaced.
9
Inspect the valve guides, replace if necessary.
10
Install in the reverse order.