E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Exhaust Manifold: Service and Repair
AR49.10-P-5531-01DA Replacing Rivet Nuts In Exhaust Manifold
Replace rivet nuts in exhaust manifold
103 589 01 39 00 Caulking screw
1
Use a suitable bolt (arrow) to knock rivet nuts out of the holes in the exhaust manifold.
NOTE: Screw in bolt by hand only.
2
Insert new rivet nut into hole of the exhaust manifold.
3
Screw In caulking bolt and tighten to about 30 Nm.