E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
1.1 Check vehicle level at front and rear axles and adjust if necessary
NOTE: With Mercedes-Benz measuring device.
1.2 Check vehicle level at front and rear axles with electronic clinometer and adjust if necessary
NOTE: With electronic clinometer.
2
Check rear axle camber
NOTE:
-
The camber on the rear axle is not adjustable.
-
If substantial deviations in the rear axle camber are found, the cause may be one of the following:
-
Too great a difference in vehicle level between right and left-hand sides of vehicle.
-
Camber strut bent.
-
Accident damage to the frame floor. Level differences at the mounting points for the rear axle carrier between the left and right sides of the
body. Experience shows that bending caused by an accident also has an effect on the toe.
AR40.20-P-0332A Check and Adjust Toe on Rear Axle
Checking And Adjusting Rear Axle Toe