E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
/v6-3.2l_(112.941)/Page-580016.png)
LEGEND
CASTER
+3 mm setting range +25 caster
-3 mm setting range -25 caster
NL = caster
INSPECTION
1. Follow sequence of steps for performing alignment
2. Check vehicle level at front axle and rear axle, refer to "Checking Vehicle Level at Front and Rear". See Suspension, Testing and Inspection.
3. Check camber, assign table value as follows:
Camber Adjustment Table
-
Measure front axle level and obtain camber value from the table.
-
Tolerance ± 20°.
-
Max. difference between left and right 20°.
Example: Front axle level (20 mm or 6.5°)
Camber value is (-0.28° ± 20°)
4. Check caster, assign table value as follows:
