E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Intake Air Duct: Technical Service Bulletins
Engine - High Oil Consumption
Date: February 26, 2003
Order No.: P-B-07.65/31
Supersedes:
Group: 07
SUBJECT:
Model 202.02, 210.06, 210.07
Model 210.26 up to Chassis No. 276396
Model 210.08 and 210.28 up to Chassis No. 084039
High Oil Consumption
If you encounter instances in the above models of high oil consumption (reference WIS document no. AF18.00-P-8044D), the seal ring (B, Figure 1)
between the intake pipe (A, Figure 1) and the throttle actuator (M16) may require replacement.
Note:
To prevent unnecessary removal, please observe the following WIS documents before proceeding:
AF18.00-P-8044D - High oil consumption.
AR18.00-P-0025AV - Measure oil consumption.
Refer to WIS document no. AR 07.07-P-1454A. To resolve, replace seal (B, Figure 1) between intake pipe (A, Figure 1) and throttle actuator (M16).
Note:
Use new seal according to parts ordering notes. Old seal part no. 112 141 0180 should no longer be used.
Parts Information
In Case of Warranty