E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
22. Fit trim strip (10) (shorten at lower end if required).
23. Glue trim strip (10) to rubber blocks with instant adhesive.
24. Cut out seal (2) in area of rubber blocks and slit at upper corner (arrow).
Only if new seal is installed.
25. Apply "Beta Seal" sealant between window and trim strip (10)
26. Insert seal (2).
Fasten with instant adhesive (arrow) if applicable.
27. Apply window sealant between window and seal (1).
28. Fill window channel with "Terolan 3200" sealant (arrows).