E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Wiper Blade: Service and Repair
Replacing windshield wiper blade
Removal
1
Remove wiper blade (1)
2
Press lugs (2, 2 each) into direction of arrow with screwdriver
3
Pull rubber wiper blade element (3) out of holders (4)
Installation
4
Insert new rubber wiper element (3) into holders (4)
5
Push rubber wiper blade element in until lugs (2, 2 each) catch properly
6
Install wiper blade
7
Switch on windshield wiper and windshield washer
-
The wiper field should be wiped free. The rubber lip on the wiper blade should flip over when the direction of motion reverses. If this does not
happen, correct angle of wiper arm so that end of wiper arm is parallel to wiping field.
-
If extremely dirty obtain separate order and clean windshield.