E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
4. Connect warning element wiring harness (22) and attach to headliner with adhesive felt tape as shown in the diagram.
5. Route warning element wiring harness (22) along existing cable on left side of headliner and fasten.
After installing the headliner, the cables should be routed on the C-pillar behind the antenna amplifier.
Component Identification
25 Parking assist wiring harness
6. Route warning element wiring harness (22) with overhead control panel/frame floor system connector (X25/8) to the rear wall beside the left rear
door.
AZ54.65-P-0001-06T Routeing and Connecting Wiring Harness
AZ54.65-P-0001-06T Routeing And Connecting Wiring Harness