E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-4010001.png)
Rear Bumper: Procedures
AZ88.00-P-0001-03PA Converting Rear Bumper
- as of 1.6.06
Do not damage paint.
1. Install center chrome molding (2), left chrome molding (3) and right chrome molding (4) in rear bumper paneling (1).
First install center chrome molding (2) and then side chrome moldings.
2. Check arrest of chrome strips on inside of rear bumper paneling (1), if necessary press again (see arrow).
3. Insert tow hook cover (6) into rear bumper paneling and hook in check strap (7)
