E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
Scuff Plate: Removal and Replacement
AZ82.20-P-0001-02T Connect Wiring Harness
Component Identification
1
Connect wiring harness (6) with connection coupling to plug position 27 at rear SAM control unit with fuse and relay module (N10/2).
2
Put relay (7) onto plug position C and assign fuse (8) on fuse location 5 with a 7.5 A fuse.
3
Route wiring harness (6) in trunk along existing leads as shown in figure.
4
Connect brown ground lead to ground connection (arrow).
Component Identification
5
Route branch-off line from wiring harness (6) for the illuminated door sill moldings in the cable duct under the left and right rear door (only with 4
door sill moldings).
6
Attach inverter (3) and route in cable duct.