mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR77.20-P-1300T Remove/Install Seal For Sliding/Pop-Up Roof Panel|Page 19409 > < Hall Sensor 1, Sliding Sunroof Lining|Page 19404
Page 1
background image

Sunroof / Moonroof Weatherstrip: Service and Repair
AR77.20-P-1300T Remove/Install Seal For Sliding/Pop-Up Roof Panel

AR77.20-P-1300T Remove/Install Seal For Sliding/Pop-Up Roof Panel

- with CODE (414) Glass electric tilting/sliding roof

Shown On Model 211.0

1

Remove wind deflector      

2

Slacken bolts (6) of front rail (2)      

3

Pull sealing (1) out of front rail (2), left side rail (3), right side rail (4) and rear rail (5)

CAUTION:  Carefully pull sealing (1) out of front rail (2), because barbs are attached to the front rail (2) and damage to the sealing (1)
could otherwise occur.
  

      

4

Press up front rail (2) and tighten bolts (6)      

5

Press seal (1) in front rail (2), left side rail (3), right side rail (4) and rear rail (5)

NOTE:  Moisten seal (1) with lubricant.Press in seal (1), with the corrugation upward, first at the points marked with arrows.

6

Reinstall wind deflector

AR77.20-P-1300T Remove/Install Seal For Sliding/Pop-Up Roof Panel|Page 19409 > < Hall Sensor 1, Sliding Sunroof Lining|Page 19404